Revolutionary Kilowatt-Scale Elastocaloric Cooling Device Unveiled
A pioneering team from the Hong Kong University of Science and Technology (HKUST) has successfully designed the first-ever kilowatt-scale elastocaloric cooling system capable of achieving comfortable indoor temperatures between 21°C and 22°C in just a quarter of an hour, even when external temperatures soar to between 30°C and 31°C. This remarkable advancement represents a substantial leap towards utilizing elastocaloric technology for large-scale commercial cooling solutions.
Addressing Climate Challenges Through Innovation
The implications of this research, recently published in the prestigious journal Nature, present a potential breakthrough in mitigating climate change, contributing to a much-needed shift towards more sustainable practices within the global cooling sector.
In light of accelerating global warming trends, our reliance on air conditioning systems is continuing to expand—cooling presently accounts for approximately 20% of worldwide electricity usage. Conventional vapor compression systems typically utilize refrigerants with significant global warming potential (GWP), heavily impacting environmental health.
The Promise of Solid-State Cooling Technologies
As an environmentally friendly substitute, solid-state cooling technologies that leverage the elastocaloric properties found in shape memory alloys (SMAs) have garnered considerable interest from both researchers and industry professionals due to their zero greenhouse gas emissions alongside high energy efficacy.
Previously developed elastocaloric devices offered only about 260 watts of cooling power—insufficient for meeting commercial air conditioning needs at scale. The HKUST research group, spearheaded by Professors Sun Qingping and Yao Shuhuai from Mechanical and Aerospace Engineering (MAE), discovered that this limitation arises mainly from two issues: balancing specific cooling power with total mass active within the system and optimizing heat transfer during rapid operational cycles.
Innovative Design Solutions for Enhanced Performance
To tackle these challenges head-on, the team introduced an innovative “SMAs connected in series—fluid channel arranged in parallel” multi-cell architecture. This inventive design links ten distinct elastocaloric units lengthwise along force application while ensuring each unit contains four slender nickel-titanium alloy tubes—a lightweight configuration totaling just over 104 grams.
The nickel-titanium tubes are designed with an impressive surface area-to-volume ratio measuring at 7.51 mm-1, vastly enhancing thermal exchange efficiency. Furthermore, adopting a parallel fluid channel layout keeps operating pressures below a manageable threshold of 1.5 bar—promoting consistent operation even at higher frequencies.
A pivotal enhancement included substituting conventional distilled water for graphene nanofluid as a modernized heat transfer medium known for its exceptional thermal conductivity characteristics; experiments revealed that this graphene solution yields heat conduction efficiency exceeding distilled water by nearly half when utilized at concentrations as low as two grams per liter.
This material’s nanoparticles measure around just 0.8 micrometers across—far smaller than fluid channel widths ranging from 150 to500 micrometers—effectively preventing any blockage concerns during operation processes while X-ray tomography indicated that these nickel-titanium tubes could maintain stable compressive structures under staggering stress levels up to900 megapascals without structural failure occurring.
Functional Viability Confirmed Through High-Speed Testing
Dramatic results were observed when subjected to operational speeds reaching up to 3.5 Hz; under conditions devoid of temperature differential lift constraints—the device achieved impressive figures including specific cooling performance rated at 12.3 W/g alongside total output capabilities clocking in at an outstanding 1,284 watts—all indicative markers validating its feasibility within real-world settings moving forward.
In recent operational evaluations, a cutting-edge cooling device successfully reduced the temperature in a model home measuring 2.7 m³ under outdoor summer conditions where temperatures reached between 30°C and 31°C. Remarkably, it managed to maintain an indoor climate at a cozy range of 21°C to 22°C within just 15 minutes.
Assessment of refrigeration capacity. Credit: Nature (2025). DOI: 10.1038/s41586-024-08549-9
This innovative technology outperforms traditional solid-state cooling systems in both cooling efficiency and ability to raise temperature differentials. The new device demonstrates a specific cooling power (SCP) value of 12.3 W/g, which nearly triples the previous benchmark for liquid heat transfer elastocaloric technologies that clocked in at only 4.4 W/g, marking the first successful breach of the kilowatt-level cooling barrier.
According to Prof. Sun Qingping, “This milestone underscores the vast potential for widespread adoption of elastocaloric cooling solutions within various industries; we are actively collaborating with commercial entities to facilitate its market readiness.”
“As global regulations regarding hydrofluorocarbons (HFCs) become increasingly stringent, this eco-friendly and energy-efficient technology stands ready to transform air conditioning practices and serve as an essential technical framework for achieving carbon neutrality,” he added, noting that consumers could anticipate reduced energy expenses alongside more compact units that optimize living spaces.
Prof. Yao Shuhuai mentioned future enhancements could bolster system performance by focusing on new elastocaloric materials as well as refining the rotary drive system’s design architecture, potentially leading to even higher capacities for rapid indoor climate control.
This remarkable advancement is yet another significant success from the research team accomplished within less than twelve months following their previous achievement with a multi-material elastocaloric unit noted for hitting a record temperature lift of 75 K—highlights published in Nature Energy in early 2024.
For further insights:
Guoan Zhou et al., “Achieving kilowatt-scale elastocaloric cooling through a multi-cell design,” Nature (2025). DOI: 10.1038/s41586-024-08549-9
Provided by
Hong Kong University of Science and Technology
Citation:
Development of the world’s inaugural kilowatt-scale elastocaloric green cooling apparatus unveiled (March 11, 2025), retrieved March 11, from https://techxplore.com/news/2025-03-world-
Exploring the Potential of Elastocaloric Cooling Technology
Introduction to Elastocaloric Cooling
Elastocaloric cooling is an innovative approach in thermal management that harnesses the unique properties of materials that undergo elastocaloric effects. This phenomenon enables heat absorption and release through deformation, presenting a sustainable alternative to conventional refrigeration methods, which typically rely on harmful refrigerants. The growing focus on energy-efficient technologies has led to a surge in interest surrounding elastocaloric systems.
Understanding the Science Behind Elastocaloric Effects
The elastocaloric effect occurs when certain materials are subjected to mechanical stress, resulting in significant temperature changes. When these materials are stretched or compressed, they can absorb heat from their surroundings during one phase and release it when returned to their original form. This process offers numerous advantages over traditional vapor-compression systems – primarily their potential for high efficiency and reduced environmental impact.
Advantages Over Conventional Refrigeration Systems
Elastocaloric technology presents several key benefits compared to standard refrigeration technologies:
- Environmental Friendliness: Unlike traditional cooling systems that utilize hydrofluorocarbons (HFCs) linked to ozone depletion and global warming, elastocaloric devices can operate without these harmful pollutants.
- Energy Efficiency: Research indicates that elastocaloric chillers could outperform conventional models by achieving efficiency ratings as high as 30%, thereby decreasing overall energy consumption.
- Compact Design: Given the absence of bulky compressors typically found in standard cooling units, elastocaloric systems promise more space-efficient designs suitable for various applications.
Current Developments and Applications
Recent advancements have propelled elastocaloric technology into practical realms beyond theoretical research. Notable is its implementation in household appliances like refrigerators where smaller foam-based prototypes have shown remarkable promise during tests conducted under real-world conditions. Moreover, ongoing research shows potential applications not only for residential use but also in automotive air conditioning systems or even large-scale industrial applications by 2025.
Statistical Growth Trends
According to recent studies published by industry analysts, the market for advanced cooling technologies is projected to grow exponentially—estimated at a CAGR (compound annual growth rate) of approximately 15% over the next decade. Key drivers include rising temperatures globally alongside increased consumer awareness regarding green practices pushing manufacturers towards adopting eco-friendly solutions like elastocalorics.
Challenges Facing Adoption
Despite its strengths, challenges persist before widespread adoption can occur:
- Material Limitations: The selection of appropriate materials remains critical; not all demonstrate adequate elasticity or thermal properties required for efficient performance.
- Cost Considerations: Initial investment costs for developing specialized production processes may deter immediate commercialization efforts.
Innovative strategies focusing on advanced material science are being pursued actively within academia and industry partnerships aiming firstly at optimizing existing substances while exploring new alloys with heightened performance characteristics at lower production costs.
Looking Towards the Future
The road ahead appears promising with ongoing investment into research facilitating further breakthroughs that could enhance capabilities across diverse sectors needing efficient thermal management solutions while promoting sustainability priorities worldwide.
with its myriad benefits coupled with environmentally friendly features making it less harmful than traditional alternatives—elastocaloric technology represents an exciting frontier for both innovation enthusiasts along with everyday consumers seeking greener living options through effective yet sustainable climate control mechanisms without compromising quality performance standards presently sought after today!